Setup guide

How to Set Up MAG Box IPTV

MAG box IPTV setup takes about 10–15 minutes: send us the MAC address, enter the portal URL we send, restart the box and start watching with one simple remote.

MAC addressPortal URLTime zoneFirmwareLIVEPortal loading

Quick answer

MAG box IPTV setup in four steps

Updated

  1. Find the MAC address. It’s on the sticker under the box and in the box’s system information.
  2. Order and send it to us. Support registers your MAC address and sends a portal URL on WhatsApp.
  3. Add the portal. Go to Settings → Servers → Portals, enter a name and the URL, then save.
  4. Restart and test. Restart the box, set your time zone and check your channels and guide.

The device

What is a MAG box?

MAG boxes are set-top boxes made by Infomir for IPTV. Models such as the MAG 322, 324, 424 and 524 connect to your TV with HDMI and to your router with Ethernet or Wi-Fi. Instead of installing a player app and typing a username and password, the box signs in to a portal using its own MAC address.

Some viewers prefer a MAG box for a few practical reasons:

  • It does one job. There are no app stores, no unrelated apps and no menus to dig through. The box turns on straight to live TV.
  • A simple remote. Channel up and down, a number pad and a guide button feel like the cable box many people are used to, which suits older family members.
  • No passwords to type. Your login is tied to the box itself, so nobody has to re-enter details after a power cut.
  • A wired connection. Every MAG box has an Ethernet port, which keeps live sports steadier than a crowded Wi-Fi network.

If you don’t own a MAG box yet, a Fire TV stick or smart TV may be cheaper to start with. See the comparison below or browse all setup guides.

Step 1

Find your MAG box’s MAC address

The MAC address is a unique ID for your box. It’s how the portal knows the box belongs to your plan, so it has to be exact.

  • On the sticker: turn the box over. The label underneath lists the model, serial number and MAC address.
  • In the settings: open the box’s settings menu and look under device or system information. The MAC address is listed there with the firmware version.

A MAG MAC address has six pairs of characters separated by colons and usually begins with 00:1A:79. The letters only run from A to F, so an “O” is always a zero. The easiest way to avoid typos is to send us a clear photo of the sticker.

Step 2

Order and have support register the box

  1. Choose a plan on the subscription page and message us on WhatsApp. Mention that you’re using a MAG box and include its model.
  2. Send the MAC address, or a photo of the sticker.
  3. Pay with the secure link we send. Card, online wallet and crypto options are available.
  4. Within 10–30 minutes of payment, we register the MAC address and send your portal URL.

Want to check a channel or a local station first? Ask about a channel before you order and we’ll confirm it.

Step 3

Enter the portal URL and restart

Add the portal

  1. Turn on the box and press the Settings button on the remote, or open Settings from the main menu.
  2. Go to Servers → Portals.
  3. In the first portal slot, enter any name, such as “Live TV”.
  4. In the portal URL field, type the address we sent exactly, including http:// and any port number or ending slash.
  5. Save, then go back to the main settings screen.

Restart and first load

Choose Restart portal or reboot the box from the settings menu. On the first start, the box contacts the portal, loads your channel list and then the program guide. This can take a minute or two, and the guide may fill in gradually over the next few minutes.

Once it loads, test your must-watch channels, your local stations and an evening sports stream, when home internet is busiest.

Step 4

Set the time zone and update firmware

Time zone for the program guide

The guide shows times based on the box’s clock. Open the box’s settings, find the date and time or time zone option, and choose your US time zone, such as Eastern, Central, Mountain or Pacific. Save and restart so the guide redraws with local times.

Firmware updates

Infomir releases firmware updates that fix bugs and improve playback. Use the update option in the box’s settings menu to install the latest version, and don’t unplug the box while it updates.

Troubleshooting

Common MAG box problems and fixes

The portal won’t load

Check the portal URL character by character, including http://, the port number and any ending slash. Make sure the box is online: an Ethernet cable plugged into the router is the quickest test. Then unplug the box for 30 seconds and start it again.

“STB blocked” or an authorization message

These messages mean the portal doesn’t recognize the box. The MAC address may not be registered yet, may have been sent with a typo, or your plan may have ended. Message support with your MAC address and a photo of the screen, and we’ll check it.

The guide shows the wrong times

Set your time zone in the box’s settings (see step 4) and restart.

Channels buffer or freeze

Try another channel first; if only one freezes, send us its name and the time. Otherwise use Ethernet or 5 GHz Wi-Fi (15–20 Mbps per HD stream), restart the box and router, and check you’re within your plan’s screen count. More fixes are in the IPTV buffering guide.

Choosing a device

MAG box vs Firestick for IPTV

MAG box compared with a Fire TV stick
MAG boxFirestick
LoginMAC address + portal URLAPI login or M3U link
Player appBuilt inInstall one
Other appsNoneMany from the Appstore
ConnectionEthernet port built inWi-Fi; Ethernet with an adapter
RemoteCable-style, number padSmall, menu-based
Best forLive TV in one room, simple useMixed use and travel

Both play your Live IPTV US channels. Already have a Fire TV? Use the Firestick setup guide instead.

Several TVs

More than one MAG box?

Each MAG box has its own MAC address and counts as one screen while it plays. Two boxes playing at once need a 2-screen plan, from $28 for one month. Send us every MAC address and we’ll register them all on one plan.

Plans & prices

MAG box IPTV plans

One subscription works on your MAG box and other devices too. Prices below are for one screen; plans for 2–5 screens at once start at $28.

All prices are one-time totals in US dollars. Compare plans for 2–5 screens

FAQ

MAG box IPTV questions

Using another device? See all setup guides.

How do I set up IPTV on a MAG box?

Send us your MAG box’s MAC address when you order. Once we register it, we send a portal URL. Go to Settings → Servers → Portals, enter a portal name and the URL, save, and restart the box. Your channels load from the portal after the restart. The whole setup usually takes 10–15 minutes, and support can walk you through it on WhatsApp.

Where do I find the MAC address on a MAG box?

It’s printed on the sticker under the box, and it also appears in the box’s settings under device or system information. It looks like six pairs of letters and numbers separated by colons, usually starting with 00:1A:79. Send it exactly as shown, or send a clear photo of the sticker so nothing gets mistyped.

What is a portal URL for IPTV?

A portal URL is the web address your MAG box connects to for its channel list, program guide and on-demand library. Instead of a username and password, the portal recognizes your box by its MAC address. We send your portal URL on WhatsApp after your MAC address is registered with your plan.

Why does my MAG box say portal not found?

Usually the portal URL was typed with a small mistake, the box has no internet connection, or the box started before the network was ready. Check every character of the URL, including the ending slash if we sent one, confirm the box is online, then restart it. If the message stays, send us your MAC address and a photo of the screen.

Can I use one subscription on two MAG boxes?

Yes, with a plan for two or more screens. Each MAG box has its own MAC address, and each box playing at the same time counts as one screen. Send us the MAC address of every box when you order so we can register all of them.

Why are the TV guide times wrong on my MAG box?

The box’s time zone doesn’t match where you live. Open the box’s settings, find the date and time or time zone option, choose your US time zone, save and restart. The program guide then lists shows at your local time.

Can I move my subscription from a MAG box to a Firestick?

Yes. A Firestick uses an API login or M3U link instead of a MAC portal, so message support and we’ll send the right login type for your new device. Your plan’s screen count stays the same.

Talk to a person

Send your MAC address on WhatsApp.

Message us any time, 24/7. Ask about a channel, get help choosing a plan, or order and start watching the same day.

See PlansOrder Now (opens WhatsApp)